RCF SUB 8005-AS (Free Shipping to Lower 48 States!) (Email for Availability)
SKU:
$3,499.00
$3,499.00
per item
DESCRIPTION
The SUB 8005-AS is on of the most powerful 21” subwoofers in pro-sound category.
Featuring a high power, hypervented 21” woofer, with 4.5” inside/outside voice coils, this cabinet is designed to deliver a serious amount of low frequency
Powered by a 2500W digital amplifier module, the SUB 8005-AS can perform in the most demanding situations. As a self-powered system, the transducers, amplification and DSP control electronics of the SUB 8005-AS are designed to optimize performance and maximize its power.
The SUB 8005-AS ‘s efficiently tuned cabinet houses two RCF Precision back- vented, long-excursion, new high power 21” inch cone drivers, providing a deep and controlled reproduction of the bass frequency range. Featuring a 4,5” inside/outside voice coil to minimize power compression and extend the life of this product.
The drivers have also been engineered for extreme efficiency, using high- gauss ferrite magnets for the most powerful magnetic eld strength. High magnetic eld strength increases the driver’s sensitivity, which yields greater output, while keeping heat dissipation requirements within operational tolerances.
Powered by a 1250W digital amplifier module, the SUB 8005-AS can perform in the most demanding situations. The input board includes volume control, deep/punch switch, high pass switch, phase switch, cardioid, time delay.
An easy to reach delay knob on the back allows to set the overall delay of the speaker, in meters, according to its application. 3 status LEDs – Power / Signal / Status are provided for monitoring the system.
The amplifier features a solid mechanical aluminum structure which not only stabilize the amplifier during transportation but also assist in the heat dissipation and, with DSP control electronics and power supply, is integrated into a single, eld-replaceable module mounted in the rear of the cabinet. The cabinet is constructed of multi-ply hardwood and coated with a textured black finish. Integral metal grilles lined with acoustical black mesh protect the cone drivers. Integrated mechanics are for multiple configuration with HDL 20-A and HDL 10-A.
MAIN APPLICATIONS
MAIN FEATURES
• 2500 Watt Peak, 1250 Wat RMS
• 137 dB max SPL
• 27 Hz - 120 Hz frequency response
• 21” Woofer, 4.5” voice coil vented woofer
• DSP controlled Input section with selectable presets • Delay control
• Baltic birch tour grade cabinet
• Compatible with NXL23-A (stacking)
• Compatible with NXL24-A (stacking)
• Multiple con gurations with HDL 10-A and HDL 20-A
FEATURES
ACOUSTICAL SPECIFICATIONS
INPUT/OUTPUT SECTION
PROCESSOR SECTION
AMPLIFIER SPECIFICATIONS
CABINET
PHYSICAL SPECIFICATIONS
The SUB 8005-AS is on of the most powerful 21” subwoofers in pro-sound category.
Featuring a high power, hypervented 21” woofer, with 4.5” inside/outside voice coils, this cabinet is designed to deliver a serious amount of low frequency
Powered by a 2500W digital amplifier module, the SUB 8005-AS can perform in the most demanding situations. As a self-powered system, the transducers, amplification and DSP control electronics of the SUB 8005-AS are designed to optimize performance and maximize its power.
The SUB 8005-AS ‘s efficiently tuned cabinet houses two RCF Precision back- vented, long-excursion, new high power 21” inch cone drivers, providing a deep and controlled reproduction of the bass frequency range. Featuring a 4,5” inside/outside voice coil to minimize power compression and extend the life of this product.
The drivers have also been engineered for extreme efficiency, using high- gauss ferrite magnets for the most powerful magnetic eld strength. High magnetic eld strength increases the driver’s sensitivity, which yields greater output, while keeping heat dissipation requirements within operational tolerances.
Powered by a 1250W digital amplifier module, the SUB 8005-AS can perform in the most demanding situations. The input board includes volume control, deep/punch switch, high pass switch, phase switch, cardioid, time delay.
An easy to reach delay knob on the back allows to set the overall delay of the speaker, in meters, according to its application. 3 status LEDs – Power / Signal / Status are provided for monitoring the system.
The amplifier features a solid mechanical aluminum structure which not only stabilize the amplifier during transportation but also assist in the heat dissipation and, with DSP control electronics and power supply, is integrated into a single, eld-replaceable module mounted in the rear of the cabinet. The cabinet is constructed of multi-ply hardwood and coated with a textured black finish. Integral metal grilles lined with acoustical black mesh protect the cone drivers. Integrated mechanics are for multiple configuration with HDL 20-A and HDL 10-A.
MAIN APPLICATIONS
- Live sound
- Rental
- Portable PA, clubs, ballrooms, live theatre
- House of worship
- Theme parks
- Music playback and sound reinforcement in small and mid-size venues
- Corporate A/V professionals and sound system hire companies
MAIN FEATURES
• 2500 Watt Peak, 1250 Wat RMS
• 137 dB max SPL
• 27 Hz - 120 Hz frequency response
• 21” Woofer, 4.5” voice coil vented woofer
• DSP controlled Input section with selectable presets • Delay control
• Baltic birch tour grade cabinet
• Compatible with NXL23-A (stacking)
• Compatible with NXL24-A (stacking)
• Multiple con gurations with HDL 10-A and HDL 20-A
FEATURES
- 2500 Watt Peak, 1250 Wat RMS
- 137 dB max SPL
- 27 Hz - 120 Hz frequency response
- 21" Woofer, 4.5" voice coil vented woofer
- DSP controlled Input section with selectable presets
- Delay control
- Baltic birch tour grade cabinet
- Compatible with NXL23-A (stacking)
- Compatible with NXL24-A (stacking)
- Multiple configurations with HDL 10-A and HDL 20-A
ACOUSTICAL SPECIFICATIONS
- Frequency Response -3 dB:27 Hz ÷ 120 Hz
- Max SPL:137 dB
- Woofer:21", 4.5" v.c.
INPUT/OUTPUT SECTION
- Input signal:bal/unbal
- Input connectors:XLR
- Output connectors:XLR
- Input sensitivity:-2 dBu / +4 dBu
PROCESSOR SECTION
- Crossover frequencies:Selectable 90 Hz - 120 Hz Hz
- Protections:Thermal, RMS
- Limiter:Fast limiter
- Controls:Xover, Phase switch, Deep/Punch, Output Delay Settings, Cardioid
AMPLIFIER SPECIFICATIONS
- Total power:2500 W PEAK
- Low frequencies:2500 W PEAK
- Total power:1250 W RMS
- Low frequencies:1250 W RMS
- Cooling:Convection
- Connections:Powercon in-out
CABINET
- Cabinet Material:Baltic Birch
- Hardware:2xM20, 4 x wheels mounting points
- Handles:2 side
- Colour:Black
PHYSICAL SPECIFICATIONS
- Height:825 / 32.48 mm/inch
- Width:600 / 23.62 mm/inch
- Depth:805 / 31.69 mm/inch
- Net Weight:66.6 / 146.8 kg/lbs